What Is Regenerative Braking In Electric Cars?


The e-zoomed FAQ series: brief responses to pertinent questions related to driving an electric car! If you have a question, simply email us at shop@ezoomed.com!



Electric Cars: The Basics


For those of you new to zero-emission electric driving, we recommend a read of the following articles:


Sign up to the e-zoomed Electric Living newsletter

What Is Regenerative Braking? And What Are The Advantages?


Regenerative braking has been around for a long time. In fact, conventional hybrid models like the Toyota Prius HEV have been using regen for the past 20 years. Today all plug-in hybrid electric vehicles (PHEVs) and battery-electric vehicles (BEVs) use regenerative braking to increase the efficiency of the electric vehicle (EV), resulting in improved electric range.     

Quite simply, regenerative braking, sometimes referred to as brake recuperation, is the process that captures and converts the kinetic energy from the motion of a vehicle into chemical energy for storage in an onboard vehicle battery. The chemical energy stored is reused for acceleration and driving.

Skoda ENYAQ Coupé iV
The All-Electric Skoda ENYAQ Coupé iV Uses Regenerative Braking (credit: Skoda)

In most conventional internal combustion engines (ICE), like petrol and diesel cars, the kinetic energy is lost at the time of braking i.e. displaced as heat, making driving ICE motor vehicle less efficient. In particular, in urban or congested environments that require frequent braking.  

In general terms, the kinetic energy in a moving vehicle is a product of the mass and speed. A heavier and faster electric car (all else being equal) will have more kinetic energy. The regen profile varies from one EV model to another.  

For example, the Audi e-tron regen profile is less ‘aggressive’ than the BMWi3. Audi is keen for the default regenerative setting in the e-tron to be as familiar as the driving profile of a conventional vehicle. However, one can change the regen profile of the e-tron, such that the regen braking is more pronounced.  

In any case, the regenerative braking commences the moment you take your foot of the accelerator. In most cases, the regen continues all the way down to 0 mph, however, some models may have a profile where there is some ‘coasting’.   

It is ‘regenerative’ because the kinetic energy can be reused at a later stage. Let’s say your Tesla Model 3 is approaching a traffic light. You release the accelerator pedal and apply the brakes. The regenerative braking process comes into immediate effect and captures and converts the kinetic energy from the forward motion of your electric car.  

When the traffic lights turn green and the accelerator is pressed, the energy captured a few moments ago is first reused to propel the vehicle forward. This way, the vehicle uses less of the stored energy in the EV battery, hence, more efficient and increases the electric vehicle range.  

The ‘efficiency’ of regenerative braking varies depending on a number of factors, to include, the type of plug-in electric vehicle, the driving mode, the driving profile, the road etc. However, in most cases, regen can harness between 60% to 80% of the kinetic energy displaced during braking. In regards to range increase, it must be noted that regenerative braking will not result in significant increase in the EV range. It certainly helps getting the most efficient range profile, but at marginal levels. What regen does instead, is reduce the inefficiencies of constant braking.     

In most EVs, the driver will have the choice of the regen profile to choose while driving. The more aggressive the profile, the greater the gain in efficiency. For example in the all-electric Nissan Leaf, the e-Pedal driving mode is a ‘one-pedal’ system i.e. at lower speeds the force of regenerative braking does not require the use of a brake pedal.   

For avoidance of any doubt, regen braking does not replace mechanical frictional brakes. Regen braking is not confined only to electric cars. The concept has also been deployed in other forms of transportation that use electric energy. For example, e-bikes, e-scooters etc. Bottom-line, getting used to regenerative braking is not a significant challenge and is relatively easy! 



While e-zoomed uses reasonable efforts to provide accurate and up-to-date information, some of the information provided is gathered from third parties and has not been independently verified by e-zoomed. While the information from the third party sources is believed to be reliable, no warranty, express or implied, is made by e-zoomed regarding the accuracy, adequacy, completeness, legality, reliability or usefulness of any information. This disclaimer applies to both isolated and aggregate uses of this information.


Featured Articles



Featured Products



Author

Ashvin Suri

Ashvin has been involved with the renewables, energy efficiency and infrastructure sectors since 2006. He is passionate about the transition to a low-carbon economy and electric transportation. Ashvin commenced his career in 1994, working with US investment banks in New York. Post his MBA from the London Business School (1996-1998), he continued to work in investment banking at Flemings (London) and JPMorgan (London). His roles included corporate finance advisory, M&A and capital raising. He has been involved across diverse industry sectors, to include engineering, aerospace, oil & gas, airports and automotive across Asia and Europe. In 2010, he co-founded a solar development platform, for large scale ground and roof solar projects to include, the UK, Italy, Germany and France. He has also advised on various renewable energy (wind and solar) utility scale projects working with global institutional investors and independent power producers (IPP’s) in the renewable energy sector. He has also advised in key international markets like India, to include advising large-scale industrial and automotive group in India. Ashvin has also advised Indian Energy, an IPP backed by Guggenheim (a US$ 165 billion fund). He has also advised a US$ 2 billion, Singapore based group. Ashvin has also worked in the real estate and infrastructure sector, to including working with the Matrix Group (a US$ 4 billion property group in the UK) to launch one of the first few institutional real estate funds for the Indian real estate market. The fund was successfully launched with significant institutional support from the UK/ European markets. He has also advised on water infrastructure, to include advising a Swedish clean technology company in the water sector. He has also been involved with a number of early stage ventures.

Buy Electric Driving Products

Sign up for e-zoomed news and offers

This site uses technical cookies to guarantee an optimal and fast navigation, and analysis cookies to elaborate statistics.
You can visit the Cookie Policy to get more insights or to block the use of all or some cookies, by selecting the Cookie Settings.
By choosing Accept, you give your permission to use the abovementioned cookies.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services
0
    0
    Your Cart
    Your cart is emptyReturn to Shop